(1) operation panel
Use to change the settings of the machine or to operate it.
(2) ADF (Auto Document Feeder)
Load a document to copy, scan, or fax. The documents loaded in the document tray are scanned automatically one sheet at a time.
Loading Documents in the ADF (Auto Document Feeder)
(3) document feeder cover
Open when clearing jammed documents.
(4) document guides
Adjust these guides to match the width of document in the ADF.
(5) document tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
(6) document output slot
Documents scanned from the ADF are delivered here.
(7) document cover
Open to load an original on the platen glass.
(8) Wi-Fi lamp
Lights or flashes blue to indicate the wireless LAN status.
Lights:
Wireless LAN active is selected.
Flashes:
Printing or scanning over wireless LAN. Also flashes while searching for wireless LAN access point during setup and when connecting to the access point.
(9) paper output cover
Open to replace the FINE cartridge or remove jammed paper inside the machine.
(10) paper guides
Slide to align with both sides of the paper stack.
(11) front tray
Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
(12) front cover
Open to load paper in the front tray.
(13) paper support
Extend to load paper in the front tray.
(14) output tray extension
Open to support ejected paper.
(15) paper output support
Extend to support ejected paper.
(16) paper output tray
Printed paper is ejected.
(17) platen glass
Load an original to copy, scan, or fax.
(18) USB flash drive port
Insert a USB flash drive to this port.
You can connect the optional Bluetooth Unit BU-30* to print directly.
Printing from a Bluetooth Compliant Device
* The Bluetooth Unit is not available in some countries or regions depending on the local laws and regulations. For details, contact the service center.
Warning
Do not connect any equipment other than the USB flash drives and optional Bluetooth Unit BU-30 to the USB flash drive port of the machine. This may cause fire, electric shock, or damage to the machine. |
Important
Do not touch the metal casing. Do not use the USB cable longer than 10 feet (3 meters) to connect to the machine since it may affect the operation of other peripheral devices. |
Page top |